idle and carb sync problems help!

[yellow 06]

i have a 2006 shee that was all stock i ride on sea level .(i dont have much knowledge about banshees and im open to learn and tips) _ i just got dmc 916 v force 4 reeds and a moose boost bottle and dyno jet stage 3 - as i read the instalation manual with the reeds it said i had to cut the stock mount to allow instaling , i did as instructed .i mounted the exhaus correctly i also did what was told in the reed manual an installed them , i also put in the 270 main jets and but my needle is stock in . the boost bottle was also instaled .

 

i tested the bike it was not perfect so i removed the reeds and put my stock ones in . the bike was working better but still not perfect .

 

any ideas ? could it be the stock needle ?

[Bkm2006]

ditch the boost bottle and read the basics on jetting there is a sticky on it somewhere.

 

http://bansheehq.com/forums/index.php?showtopic=23546

 

also there is a youtube video that shows you how to sync your carbs.. a sync tool would be helpful i bought mine at fast for around 40 bucks