Oregon dunner Posted August 8, 2012 Report Posted August 8, 2012 I just picked up another banshee that has a pretty much stock motor except cpi in frames and vf3's and K&N pods. It has the tors still on it. The guy said it might need to be jetted and not quite sure if he new what size jet he had in it. I took it all apart and it had had 310 mains. Needle was in 3rd clip with 25 pilots. It seems to run rich for a stock motor when I start it up. IS this a little rich for riding at sea level with these mods? Thank You. Quote
Dahl87banshee Posted August 8, 2012 Report Posted August 8, 2012 I would try a 27.5 and a 300 and leave the clip. Quote
bansheesandrider Posted August 8, 2012 Report Posted August 8, 2012 No expierence with CPIs, but I would definetly put in a 27.5 pilot, 310 is probably rich so try a 300 or maybe even a 290. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.