Jump to content

Recommended Posts

Posted

I tried messing with the cable a little, I can get it idle at times but not perfect.. Right now the bike has a twist throttle on it and I'm wanting to put a thumb throttle on it. I'll mess with adjusting the cable more when I get the twist throttle removed.

Posted

Does the needle clip position affect the idle and low end any..? I was told that's all in the pilot jet but maybe I was told wrong.

 

Pilot is like the first 1/8th, needle to 3/4 ish... Then main.

Plug chops not necessary... Just look at it. Or pull a pic and let us see.

Posted

Put some 27.5 pilots in the carbs, and set the air mixture screws to 1.5 to 2 turns open. Most aftermarket pipes like a little bigger pilot, and that's especially true with the FMF pipes.

Posted

Alright thanks guys for all the advice, I went to get some 27.5 yesterday but that place didn't have any so I'll have to wait until mid week and try another place hopefully they will have some, then I will put in some new plugs, run the bike, and post some pics of the plugs for everybodys opinion but that will be mid week or later so just keep checking back.. I'm still not sure if I should move my needle or not I guess I'll leave it alone for now.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...