Chip M Posted April 20, 2012 Report Share Posted April 20, 2012 if i will need to go up a piston size with boring a bit the cylinder. will i need anything else except pistons? here in cyprus its a bit hard to find parts so ebay is ok.ive been long years been on ebay ordering all sorts with no prob. if something goes wrong from sellers side most of the times a replacement or refund is issued Pistons,rings, wrist pins, wrist pin bearings and wrist pin circle clips. It is pretty normal to replace all with a new set of pistons. Some people will reuse the wrist pins and bearings but for the little bit extra, it is not worth the chance you take if one fails with your new top end. Like was stated to you in earlier post, you really should have your cylinders checked for size and roundness. New piston and rings does not do much good if you have bad/wore out bores in your cylinders. Good luck Quote Link to comment Share on other sites More sharing options...
Philippos Posted May 12, 2012 Author Report Share Posted May 12, 2012 Advanced at 4'. Noticeable gain in the low. Overall better performance Quote Link to comment Share on other sites More sharing options...
ClayAiken Posted May 12, 2012 Report Share Posted May 12, 2012 Advanced at 4'. Noticeable gain in the low. Overall better performance Yeah thats a great cheap easy mod thats give you a good bang for ur buck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.