Jump to content

Recommended Posts

Posted

please some one help me im lost and affraid to burn it up

 

 

Not trying to be a dick here, but why exactly would it burn up? Did you just move to a higher elevation? The bore itself isn't going to make much of a difference, if any at all.

Posted

You should get a set of pipes for that 87.....I just happen to have a set i will sell for a good price. What elevation was the bike at? Why are you so concerned about jetting. What is going wrong?

Posted

you will be fine.

 

my question is how can an 87 still be stock?

 

port it, stroke it, pipe it, new carbs, that thing is to old to be a virgin! :rotflmao:

Posted

Well I just bought it and put rings and pistons in and I won't run right the needles are all the way up and air screws r out three turns with 200 main and 25 pilot

Posted

Well I just bought it and put rings and pistons in and I won't run right the needles are all the way up and air screws r out three turns with 200 main and 25 pilot

Posted

Well I just bought it and put rings and pistons in and I won't run right the needles are all the way up and air screws r out three turns with 200 main and 25 pilot

 

what is it doing? not idleing, won't rev, stumbles?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...