PDLS Posted February 23, 2012 Report Share Posted February 23, 2012 I bought my shee a few months ago and noticed last time I rode it the rear hubs were loose. Never noticed until we bought my wifes that my rear was wider. After looking at it, I have an adjustable rear axle that has been coated black. The outter hubs will not tighten up completely and if I remove the spacers the hubs will not slide in any further than they do with the spacers in. The castle nuts get tight but the hubs still wobble and the castle nut barely clears the hole to allow the cotter pin to slide through. Is there any definate way to tell what axle this is and would stock hubs be ok to run with this axle? I'm getting to where I like XC and MX style riding, just have to get that jumping thing down. Thanks, Ryan Quote Link to comment Share on other sites More sharing options...
blast off Posted February 23, 2012 Report Share Posted February 23, 2012 post up a pic of the axle and side view of the castle nut on the axle and maybe someone will know the make and help you out. are the hubs stock or aftermarket? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.