willardwright59 Posted February 9, 2012 Report Posted February 9, 2012 I have a set of stock carbs i thought? The inner part that goes into the intake measures 28mm? Dont that mean theyre 28's? Quote
97BANJO Posted February 9, 2012 Report Posted February 9, 2012 I have a set of stock carbs i thought? The inner part that goes into the intake measures 28mm? Dont that mean theyre 28's? you are right the measurement on the intake side at the inner part. So they would be 28's. Quote
andrew3160 Posted February 9, 2012 Report Posted February 9, 2012 Do you have one choke for both carbs or separate chokes? Quote
fuzzypickles Posted February 11, 2012 Report Posted February 11, 2012 Are you measuring the inside space or are you measuring the rim too? If your measuring the rim too then you might be getting a false reading. the rim is about 1mm wide, so if you had measured the rim on either sides it would add 2mm to your reading, when the inside diameter is actually 26mm... Quote
willardwright59 Posted February 11, 2012 Author Report Posted February 11, 2012 I got an answer. Theyre tapered. I messure the inner part of the taper. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.