reveal88 Posted January 13, 2012 Report Posted January 13, 2012 I have for sale a polished set of cylinders with pistions, believe they are on there last bore, still had 175 psi compression on both sides with my cut domes for a 4mil, im going to a cub. cylinders are dune ported now, dyno with my setup at 75hp with 34 pj carbs. sorry dont have any pics, motor is at WK Racing, payment can be made to White Knuckle Racing and they will ship,price is 350.00 obo plus shipping, this will bolt up and run for awhile, then maybe install new sleeves down the road. need to sell Quote
reveal88 Posted January 15, 2012 Author Report Posted January 15, 2012 Who did the porting? Streamline racing, WK touched it up Quote
reveal88 Posted January 17, 2012 Author Report Posted January 17, 2012 I have a coolhead also with cut domes for a 4 mil can put in the deal also, sell all for 300.00 plus shipping Quote
reveal88 Posted January 17, 2012 Author Report Posted January 17, 2012 19cc, could go more, i was going to but buying a one piece head now Quote
reveal88 Posted January 19, 2012 Author Report Posted January 19, 2012 I have always ran straight race fuel, I asked WK they say min 50/50 since the compression was 175psi Quote
reveal88 Posted January 20, 2012 Author Report Posted January 20, 2012 Bore is a 66.5 mm any takers? WK Racing could send pics for the truly interested. Quote
reveal88 Posted January 22, 2012 Author Report Posted January 22, 2012 Price drop! 200.00 OBO minus head, head sold Quote
reveal88 Posted January 23, 2012 Author Report Posted January 23, 2012 175.00 shipped. cylinders and pistons Quote
jtbhq420 Posted January 24, 2012 Report Posted January 24, 2012 Can u send pics to [email protected] I definitely interested. Also do normal domes or do they need to be cut for a 4 mill, I'm working on getting all my parts for my first 4 mill build Quote
vanilla gorilla Posted January 24, 2012 Report Posted January 24, 2012 im very interested hopefully someone can shed some light on this question stock stroke motor is what i have right now with 17 cc cool head domes will my compression be higher or lower than 175? or will my domes not work im a little unsure since it was a 4 mil?? thank you and can you send a pic of the porting to [email protected] Quote
reveal88 Posted January 25, 2012 Author Report Posted January 25, 2012 Payment pending SOLD!!!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.