willaduncan Posted January 6, 2012 Report Posted January 6, 2012 I know this article is based for 4-strokes but... break in process should be about the same, I know after Kevin re did my topend he said break in is not necessary to just ride the hell out of it, so what do you guys think of this article??? http://www.mototuneusa.com/break_in_secrets.htm Quote
willaduncan Posted January 6, 2012 Author Report Posted January 6, 2012 break in, start up and make sure it idles good. then check to any issues. rev it up a few times and see if anything bad happens. then i take it for a spin but dont got WOT right away. after a couple minutes it is time to ride. I agree from what kevin told me and my recent build start it up let it warm up check for leaks and what not then ride for a few minutes not over 1/2 throttle then after about 10 15 minutes still runs good fuckin rip it Quote
camatv Posted January 6, 2012 Report Posted January 6, 2012 the harder you break it in the better its going to be. IF it was built right in the first place. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.