2 into 1 keihin 38 air stricker

[joecrossman69]

hello

 

i finish all preparation of my banshee but i have no idear of all jetting to use

 

my config :

 

powerhead duncan 19cc

cylinders Paul Turner national

pyramid reed valve

chariot 2 into 1

air filter type car double cone

hight rev Paul Turner pipes

 

thanks so much for your help

[sleeper06]

try 185 main 45 pilot,needle 4th clip

[sleeper06]

there you go a better opinion on that set up,go with it if zilla has messed with it b4 im also pretty sure a duncan international motor is ported

[NJ2STROKE]

for my 2-1, with same carb, i had a norz needle, like a 165 main, and a bigger pilot. but i had fmfs, porting, and a different manifold.

 

any thoughts on a 41mm? set up is in my sig

[sheerider1026]

i run 19cc domes, t5's,. 35mm pwk.. EEK needle, middle clip... 170 main, 48 pilot.. runs great

[NJ2STROKE]

i run 19cc domes, t5's,. 35mm pwk.. EEK needle, middle clip... 170 main, 48 pilot.. runs great

 

I think that a 35mm pwk will be my next move. Im still waiting on the jets i ordered, no parts stores around carry any. im gonna start at 180 and work my way down. it comes with a 160 so i should have some room to play. dont have a vice so its gonna be hard to do a plug chop