mobette_baby Posted November 10, 2011 Report Share Posted November 10, 2011 I just got a used pd cool head and I have never dealt with the head before but I know it shouldn't be sealed together. My question is how am I suppose to get this thing apart without recking it? Quote Link to comment Share on other sites More sharing options...
Dicklez Posted November 10, 2011 Report Share Posted November 10, 2011 Should only be orings in there. If someone siliconed it you will just have to lightly pry around untill it pops apart. Quote Link to comment Share on other sites More sharing options...
mobette_baby Posted November 10, 2011 Author Report Share Posted November 10, 2011 Should only be orings in there. If someone siliconed it you will just have to lightly pry around untill it pops apart. Yeah that's pretty much what I figured thanks man. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted November 14, 2011 Report Share Posted November 14, 2011 if it has domes installed, screw in a sparkplug and push them out. if that takes force, you can put the brunt force on the plug with the head propped up on a piece of wood or 2 on the bench to give room for it to pop. after that, you can pry on the inside of it with a heel-bar or something without damaging a mating surface. it's probably just stuck on the dowels and/or cooked o-rings, so try to pull evenly, not dick-eyed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.