miami350 Posted November 2, 2011 Report Posted November 2, 2011 i just some pwk 35mm carbs bear with no needle and jets what needle should i get and jets .. my bike only has cpi pipe and a timinng plate.... but other then that the bike stock. So tell what jets and needle to run .. im in miami,FL Quote
gotta_goatsfast Posted November 2, 2011 Report Posted November 2, 2011 Dude 35mm PWKs are HUGE for your setup. I wouldn't even know where to start. In order for it to run proper on the top end you'll be burbling and mushy in the low-midrange. I suggest running something smaller like 28 PWKs. Quote
miami350 Posted November 3, 2011 Author Report Posted November 3, 2011 Just found out my piston are 66.25mm so i need to know the jetting to run Quote
powervalve400 Posted November 4, 2011 Report Posted November 4, 2011 Just found out my piston are 66.25mm so i need to know the jetting to run Try starting with 6.0 slides, cel needles in the 3rd clip from the top. 50 to 52 pilots and 158 mains. Should get you in the ball park. Very important make sure you are getting full throttle. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.