Jump to content

Recommended Posts

Posted

Ok guys so I cleaned my carbs recently but still when I start the bike it has trouble starting n when it does if your not giving it gas it just dies....I know it's a prob something stupid but I dnt hav the time to b out there diagnosing it thanks for the help

Posted

make sure the half moon cut outs on the slide are facing towards the air filters... also make sure you reattached the choke tube that goes between the two carbs.

Posted

Ok guys so I cleaned my carbs recently but still when I start the bike it has trouble starting n when it does if your not giving it gas it just dies....I know it's a prob something stupid but I dnt hav the time to b out there diagnosing it thanks for the help

 

 

Well I would check the choke tube is on the cards, check the slides are in right way with cut facing the air filters, last is to check the float bowl are on the right carbs.

Posted

The slides are in right the bowls are on the right side I did a carb at a time, it wasn't even Startin before I cleaned the ccarbs,

 

 

 

choke tube from carb to carb ?????

Posted

its a little tube about 3 inches long . it is located between the two carbs about half way down the carbs . it links the chokes on the carbs together . if u dont have the choke tube ur bike will not run right if at all . do u still have the tors ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...