421alkybanshee Posted June 1, 2011 Report Posted June 1, 2011 If I have a rough idea of what a set of cylinders measure out to with a set of dial indicators= 2.560 what is this in MM? Im trying to figure out a bore size on this banshee i just aquired. It had namura pistons in it that read 1.00 on the top of them. Thanks for your help Quote
RobertR Posted June 1, 2011 Report Posted June 1, 2011 If I have a rough idea of what a set of cylinders measure out to with a set of dial indicators= 2.560 what is this in MM? Im trying to figure out a bore size on this banshee i just aquired. It had namura pistons in it that read 1.00 on the top of them. Thanks for your help That would be 65.024mm Quote
421alkybanshee Posted June 1, 2011 Author Report Posted June 1, 2011 That would be 65.024mm So how much more life is left on these? Quote
421alkybanshee Posted June 1, 2011 Author Report Posted June 1, 2011 also, how can you tell if they have been resleeved? Quote
lms1977 Posted June 1, 2011 Report Posted June 1, 2011 you can go to 66.5mm but you have to get the head modified and resleeving is usually not worth the cost just get a new set of jugs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.