gm_71chevelle Posted May 17, 2011 Report Posted May 17, 2011 Hey guys I just installed a pair of v force 3 reeds in my banshee and before I installed them it ran fine, but now i can't get it to start. So I was hoping someone could help me figure out what's going on. I greatly appreciate any help. Thanks guys. -Dylan Quote
BUILDER Posted May 17, 2011 Report Posted May 17, 2011 Did you pull the slides out of the carbs when you did the reeds? If you did you may have got them in backwards? Did you unplug anything or just pull the carbs out of the way and do the reeds? Quote
iame Posted May 17, 2011 Report Posted May 17, 2011 if you still have tors that probably it exact same thing happened to mine except i used rad valves Quote
gm_71chevelle Posted May 17, 2011 Author Report Posted May 17, 2011 When I installed them I just moved the carbs over out of the way. And the tors is eliminated. Quote
gm_71chevelle Posted May 17, 2011 Author Report Posted May 17, 2011 When I installed them I just moved the carbs over out of the way. And the tors is eliminated. Quote
gm_71chevelle Posted May 17, 2011 Author Report Posted May 17, 2011 I didn't re jet for the reeds I've heard mixed answers about whether or not I needed to re jet. So I didn't re jet. Quote
gm_71chevelle Posted May 17, 2011 Author Report Posted May 17, 2011 Figured it out. It was the choke tube, don't know how i overlooked that. Thank you for the help guys, much appreciated. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.