what jets to start with?

[5.0bronco]

im fixing to put a trinity stage 4 intake on my bike with a 34mm pj carb, air box with no lid and a k&n filter, pro design cool head with 21cc domes, v force 3 reeds, t 5 pipes, timing +4 degreese, about 600ft above sea level and running around 75-90 ambient temp. im wondering where i should start with my jetting and what type of fuel would be best to run with this set up

[powervalve400]

im fixing to put a trinity stage 4 intake on my bike with a 34mm pj carb, air box with no lid and a k&n filter, pro design cool head with 21cc domes, v force 3 reeds, t 5 pipes, timing +4 degreese, about 600ft above sea level and running around 75-90 ambient temp. im wondering where i should start with my jetting and what type of fuel would be best to run with this set up

 

As a starting point DGK needle in the 3rd clip, 52 pilot, 190 main, fuel air 1 to 1 1/2 out. Always check you spark plugs!

[sleeper06]

check your compression before you select fuel but im pretty sure 93 is fine.Good safe starting piont is 50 pilot,162 main,cel needle 4th clip