30 mm Carbs

[robert0762]

I am lookin to get a set of 30 mm but I cant seem to find 30 mm PWK's. Do they make a 30 pwk ? If not then what other options do I have . I do not want oko's or Pj's .

[sleeper06]

They make em ,SUDCO INC ,or go with 33s that 4mil will wake up

[Screamin_Banshee]

OKO makes a 30mm carb, that are usually cheaper than the Mikuni and Keihin's.... I think user "jasons" has or is using them. Ya might check with him, see how he likes em.

 

 

IMO- with that 4mil id be looking at 33's or a lil bigger.

[wfobasheeboy]

PWK does not make 30mm carbs. You have to get 28 & have them bored to 30mm. I got a set of 28 that are bored to 30mm off of a guy from here & they work great. But for your set up I think 33 or biger is the way to go.

[robert0762]

I do mostly trail riding and my setup is a low/mid. PC Pipes , MX Port Bumped timing and compression boyssen dual stage reeds . I always read on here that 28 or 30 will give you the best low mid throttle response. That is the reason why I never considered 33,s . I dont want to by a set of carbs and be disapointed that they do not perform best in the type of riding that i do 85 percent of the time. But if I can get away wit runnin 33,s and gain some top end with my current setup then hell yeah I,ll go wit 33's

[armyvet]

I agree>i think alot of people arent really practical as to what they want or NEED.Bigger isnt always better,too much carb can make a banshee a handful when its out of its elementbeen there done that.With that said imo its hard to beat a set of tuned pwk 28s for play riding on just about any set up.You really dont need all out topend hp for your application especially with the mx port and high compression youll love the 28s.

[robert0762]

I agree>i think alot of people arent really practical as to what they want or NEED.Bigger isnt always better,too much carb can make a banshee a handful when its out of its elementbeen there done that.With that said imo its hard to beat a set of tuned pwk 28s for play riding on just about any set up.You really dont need all out topend hp for your application especially with the mx port and high compression youll love the 28s.

 

 

Have no complaints so far . The tunability over stock is amazing . Also the quality is much better , wich is why i shy away from oko 's .