please help keihin 34/36mm carbs? what jets should i use?

[FourStrokeTHIS!!]

ok guys so im new here i have owned a few banshees just got this one about a months ago it has a cool head 24cc domes pro filter with airbox an no lid has carbon fiber reeds an spacers not sure who makes them but i know there carbon 2 pj series 34mm/36mm carbs? dunno witch it seems like its running very rich it bogs at wide open an then wont stay idling when it revs bak down it has a 158 main jet an a 55 pilot i moved the needle clip to the leanest notch with no help it had stinger drag pipes on it when i got it so i put the fmfs on any suggestions what size jets i should be running on my setup thanks any info is greatly appreciated

[sleeper06]

You should be in the range with the mains but pilots should be around 48-50,cel needles 4th clip.My concern is what kind of compression do you have with 24cc domes ,is it a 4mil or bigger?Check your plug caps for resistance,3-7kohm

[FourStrokeTHIS!!]

thanks sleeper idk the compression seems fine when u put ur finger over the plug holes it will plow your finger off an make a pop idk if its a 4 mill or not how can i tell? i went riding for a few hours today on it an it just seems like its spitting an sputtering at wot an when it reves bak down seems like it wants to load up an bog out an sometimes when u wind it out in first an hit second it just falls on its face everything is tight an nothing is sucking air or leaking any other thoughts?? thanks alot