Jump to content

Recommended Posts

Posted

ok im new to 2 strokes. I have a 89 banshee, with v force 3 reeds fmf pipes, k&n, and I just did the timing plate swap and set to 4 deg. took the bike out and ran good. well till the little hose that comes out of the clutch cover blew the o ring and water started leaking out under the carbs. so I put the bike on its side to open the clutch cover as I have done in the past when I put in the new clutch. I fixed the problem there and put new clutch cover seals. put it all back and now it wont start. I changed out plugs thinking that was maybe the problem. I then checked for spark. I have spark. well i kicked it for a wile. checked the plugs and no fuel, dry. so I sprayed a little starting fluid and she fired up but then died. so by me putting it on its side mess up something in the carbs? I got pissed off and gave up for the night. this morning i go out and it starts fight up but boggs bad down low but is good on the top. It wont idle at all. please help me out I don't know what i did. I was thinking maybe I got some crap some how in the carbs. please help.

Posted

ok im new to 2 strokes. I have a 89 banshee, with v force 3 reeds fmf pipes, k&n, and I just did the timing plate swap and set to 4 deg. took the bike out and ran good. well till the little hose that comes out of the clutch cover blew the o ring and water started leaking out under the carbs. so I put the bike on its side to open the clutch cover as I have done in the past when I put in the new clutch. I fixed the problem there and put new clutch cover seals. put it all back and now it wont start. I changed out plugs thinking that was maybe the problem. I then checked for spark. I have spark. well i kicked it for a wile. checked the plugs and no fuel, dry. so I sprayed a little starting fluid and she fired up but then died. so by me putting it on its side mess up something in the carbs? I got pissed off and gave up for the night. this morning i go out and it starts fight up but boggs bad down low but is good on the top. It wont idle at all. please help me out I don't know what i did. I was thinking maybe I got some crap some how in the carbs. please help.

sounds like a float issue in your carbs ,maybe from laying your bike on its side, shee may have not liked that, so yes i would investigate your carbs.

Posted

Ok guys thanks for the help. I got it. It was the hose that links the 2 crabs together. One side came off. Runs great now.

 

 

Those dual 'crabs' can be a PITA!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...