Jump to content

Recommended Posts

Posted

thats what i figured but i also wanted to leave my lid on but, it is 30 degrees out right now so i figured with the low temp and the lid on 280 should still be good right?

Posted

thats what i figured but i also wanted to leave my lid on but, it is 30 degrees out right now so i figured with the low temp and the lid on 280 should still be good right?

oh that would be fine its in the 50 - 70 s here so i didnt think about it id try with 280s first its better to be rich than lean

Posted

i wish it was that nice here, everyone else here is ridin sleds, but we have an awsome flat track plowed out on my buddies lake i cant wait to hit up remind everyone what a banshee can do and kick some 450 ass no one around here has had a bansheee since before the 450s came out and i think they all forgot how fast they are once theyre piped

Posted

i wish it was that nice here, everyone else here is ridin sleds, but we have an awsome flat track plowed out on my buddies lake i cant wait to hit up remind everyone what a banshee can do and kick some 450 ass no one around here has had a bansheee since before the 450s came out and i think they all forgot how fast they are once theyre piped

yea did that last weekend they talked shit all week when i showed up they said i didnt expect that i beat a rmz 250 dirtbike and the guy with ltr450 pussied out biggest grin on my face all year :lol:

Posted

i wish it was that nice here, everyone else here is ridin sleds, but we have an awsome flat track plowed out on my buddies lake i cant wait to hit up remind everyone what a banshee can do and kick some 450 ass no one around here has had a bansheee since before the 450s came out and i think they all forgot how fast they are once theyre piped

have you ever ha pipes on the banshee before its like night and day

Posted

ive only rode one with pipes once like 3 years ago and loved it i just traded my 400ex for this one like 2 weeks ago and i love it i just wanted a lil more so i found some nice used pipes 2 days after i got it lol n they just got here today. My budddy has a kx250f bored to a 285 with a pipe that id really love to shut up but i think he might be a lil more of a challenge

Posted (edited)

ok the problem was the tube going across i ended up having to switch the carbs with some other stock ones my buddy had be cause i messed with so much and couldnt get em back to right we put the other ones on with 280 mains in it it started up ran great then when i went to give it gas it almost seemed likke it was hitting a rev limiter at like a quarter or eighth throttle unless the wheels r turned all the way right it runs n revs great. I tried re routing throttle cable helped for a few seconds then got worse tried, I adjusting it from the adjustment by the thumb throttle and it didnt make a difference. I ordered a new cable tonight i just wanted to see if u guys had any ideas or knew of any other adjustments

Edited by jtbhq420
Posted

just spin kiddies in the direction it actually runs..

 

probably the park brake switch on the bars..

 

or you need to turn the gas on

Posted

just spin kiddies in the direction it actually runs..

 

probably the park brake switch on the bars..

 

or you need to turn the gas on

 

 

there is no parking brake on it i adjusted the adjustment by the bars and nothing changed gas has been on itll idle all day great and if the bars are turned all the way right she revvs great but middle and left it wont rev like a rev limiter is stoping im hoping its just the cable but it may be somthing simpler from what ive read its what the parking brake switch would do but there isnt one there

Posted

there is no parking brake on it i adjusted the adjustment by the bars and nothing changed gas has been on itll idle all day great and if the bars are turned all the way right she revvs great but middle and left it wont rev like a rev limiter is stoping im hoping its just the cable but it may be somthing simpler from what ive read its what the parking brake switch would do but there isnt one there

park brake limiter, or make sure the tors is unhooked.

Posted

the tors system is still there can i unhook it with out the tors being removed

 

i unplugged everything and it made no difference throttle cable should be here tomorrow hopefully thats what it is or could somthing be getting hung up in the tors system

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...