THE358BANSH Posted February 21, 2011 Report Posted February 21, 2011 Does any one have a picture or know how the mid-pipes attach to the 916 style muffler? I'm trying to figure out if they slip in, have a flange, or use a rubber coupler like the expansion pipes. Thanks much! Evan Quote
Bansheeb0y5505 Posted February 21, 2011 Report Posted February 21, 2011 Does any one have a picture or know how the mid-pipes attach to the 916 style muffler? I'm trying to figure out if they slip in, have a flange, or use a rubber coupler like the expansion pipes. Thanks much! Evan The headpipes attach to the midpipes by a coupler like every other exhaust. Then the two midpipes attach to the canister. Basically there's two holes on the back of the canister, one for each midpipe. Each one has a groove for an o-ring and 3 studs. You put the o-ring in the groove, then slide the mid-pipe onto the studs. Bolts on with nuts. Quote
THE358BANSH Posted February 22, 2011 Author Report Posted February 22, 2011 The headpipes attach to the midpipes by a coupler like every other exhaust. Then the two midpipes attach to the canister. Basically there's two holes on the back of the canister, one for each midpipe. Each one has a groove for an o-ring and 3 studs. You put the o-ring in the groove, then slide the mid-pipe onto the studs. Bolts on with nuts. Figures, I look for a week before I post this. You explain it great and then I find the picture that would have saved us both some effort. Thanks again... http://i929.photobucket.com/albums/ad137/08_BANSHEE/DMC7.jpg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.