robert.b.west Posted February 4, 2011 Report Posted February 4, 2011 To remove the key switch do I just need to connect the black/red and black/white wires? It is a 2001. (not sure if they changed wire color) also my colors my be wrong above. I was looking at the writing schematic posted here but out gets blurry and can't read what colors they are. Quote
boise_banshee Posted February 6, 2011 Report Posted February 6, 2011 Got rid of the key switch and connected the wires to a small toggle switch, now I have a hidden kill switch. Much cleaner look, while retianing a real off feature. Quote
bansheeyfz450 Posted October 5, 2011 Report Posted October 5, 2011 Anybody have pics of this? Do you unplugg the harness of key.. I mean do you connect black/red & black/white b4 it plugs to the harness? Quote
J-Madd Posted October 7, 2011 Report Posted October 7, 2011 The red/black and black wires go together (and to ground if you run one.) Make sure the black/white wire is disconnected completely. Now you won't have a way to kill it though. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.