help! what jets to run

[sanscon]

ok here we go, i bought a shee with a hole in the piston. pulled the motor, removed the 400 cub top end, split the cases and welded and balanced the hot rod crank. all new bearing 'seals, pistons' rings and its all back together. I have 175psi per side with 20 domes. 34 mm pj's and i ride a glamis cal. what jets should i run. I have a feeling it was to lean before with a 148 main and 52 pilot

[sleeper06]

165,48,cel 4th clip