cjay1985 Posted December 9, 2010 Report Posted December 9, 2010 I have a 06 banshee have a hard time with the idle after removing t.o.r.s. revs high for a few before it comes back down. new to the banshee ans two strokes. Quote
06specialedition Posted December 9, 2010 Report Posted December 9, 2010 I have a 06 banshee have a hard time with the idle after removing t.o.r.s. revs high for a few before it comes back down. new to the banshee ans two strokes. Did you tap your idle screws in your carbs? Quote
SAVAGE420 Posted December 9, 2010 Report Posted December 9, 2010 Sounds like air is getting in where it shouldn't. I would start it up again, and get a spray bottle with water and some hand soap in it and spray it all over the carbs, intakes and what have you. If you see bubbles, well then there is where air is getting in. I assume it didn't rev like this before the removal? Try it and let us know what you find and we'll go from there. Quote
cjay1985 Posted December 9, 2010 Author Report Posted December 9, 2010 I have a 06 banshee have a hard time with the idle after removing t.o.r.s. revs high for a few before it comes back down. new to the banshee ans two strokes. I will give it a go and get back to you thanks Quote
cjay1985 Posted December 9, 2010 Author Report Posted December 9, 2010 I will give it a go and get back to you thanks one more thing i also did a complete top end gasket kit on it so don't know if that would have did anything to it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.