case torque

[SiCkBaNsHeE_990]

Well i had to split the case on the banshee i just bought to replace the crank that had a broken rod. Anyways ive never been this far into the engine and was just wonder what the torque need to be on the bolts that hold the case together and if there is a specific tightening procedure. Any info would be great. Thanks

[SiCkBaNsHeE_990]

lol didnt even notice the numbers on the case..thanks

[jasons]

tighten crankcase nuts 1-8 to 3.6 ft lbs

tighten crankcase bolts 9-16 to 3.6 ft lbs

then crankcase nuts 1-8 to 7.2 ft lbs

crankcase nuts 1-8 to 18 ft lbs

crank crankcase bolts to 7.2 ft lbs

 

this is per the clymers manual.