28pwk float hieght and questions

[Nutwood 472]

Hey guys,we just put a 4mil drag ported motor together,has 180 compression,v force 3 reeds,billit intakes cool head,420 elevation,well we have a set of 28pwks and one of them keeps fillen pipe up with gas,so I need the float hieght and see if its adjusted right and we cleaned them and cleaned them,but it keeps pouring gas into the pipe,they are brand new carbs from CPW and it just started doing this funky shit,I've heard of 28pwks going bad and theres nothing you can do about it,the 33s and 35s dont go bad like the 28s,could there be a crack in the housing and letting gas just flow in? Please some insight on the 28pwks anybody? found the float hieght is 19mm for the 28pwk,still like to know if anybody ever similar problems?

[sleeper06]

I could be wrong but i thought pwks were 15-17mm i usually set them at 16mm,im also not fimiliar with smaller pwks

[Nutwood 472]

I could be wrong but i thought pwks were 15-17mm i usually set them at 16mm,im also not fimiliar with smaller pwks

 

 

Yeah the 35s are 16mm,but the 28s are 19mm,and we found the problem with the carb,when my buddy changed jets,the whole insert screwed out and he lost the little needl jet that sticks up out of the barrel and sprays gas,well found it and put it back in and now the carb isn't filling the pipe up with gas and its hitting on the cylinder and running like a 4mil champ,lol

[sleeper06]

good to hear