banshee is not starting constanly flooded

[yeahitsmine]

My banshee seems to be flooded when I try to kick it on gas starts to come out of the head where the exhaust pipe connects i can only start the bike buy pushin it once it is started it will start up fine. Whats wrong guys and how can I fix it?

[Sandking]

Check your float heights they should be 20-22mm from the float mating surface without seal to base of float. On stock Carb.

[yeahitsmine]

Check your float heights they should be 20-22mm from the float mating surface without seal to base of float. On stock Carb.

 

wheres the float height and if you can how would I go about fixing that

[Sandking]

Remove the carbs , flip them over and remove the float bowls. The floats are the black circular plastic pieces that move up and down. Flip the Carb back over and measure the distance from the base of the Carb to the base of where the float comes to rest. Should be 20-22mm.

[yeahitsmine]

Remove the carbs , flip them over and remove the float bowls. The floats are the black circular plastic pieces that move up and down. Flip the Carb back over and measure the distance from the base of the Carb to the base of where the float comes to rest. Should be 20-22mm.

 

thanks imma check that