Snopczynski Posted August 1, 2010 Report Posted August 1, 2010 Here is what I have guys. Feel free to PM me or post if you have questions. I have pictures on the link below. If you guys get multiple things it may be priced different so you can get a package deal. and shipping will vary depending on what you get, and where you live. Not all this stuff is in perfect shape, but I will make sure that you know what kind of shape something is in if you are interested in anything in particular. Feel free to post or pm me with any questions. You can email me also. Here are the pictures, and the list below has been updated. There are 4 pages of pictures. Snopczynski Parts Pics Link *click here* 2 Full sets of banshee stock a-arms. Both sets are silver, and I will split them up if you need a certain arm. The arms are used, but nothing is loose. 1 of the sets is currently on my bike. For 4 arms your looking at $125.00! For each arm it would $35.00! 1 set of Works front shocks in Dual rate. Black spring and a white spring on the shock. Sprung for 180-200Lbs rider. Shocks are used and in good shape. These shocks are currently on my bike. I rode with them when I was a 165Lbs, to the fat ass 194 Lbs I am now. $200.00 Right and left spindles used and in good shape. $40.00 Right and left Stainless tie rods with tie rod end joints. $30.00 A set of complete front hubs with bearings and brake discs that are used. $40.00 A set of stock jugs at 64mm bore that need a bore job, and the bottom of the transfer ports have been cleaned up on them. I can have Dan Wade at Patriot Racing bore em before I send them. $100 without the boring done. $225.00 with the boring done. A set of stock reed cages with what look to be older boyeseen reeds on them, they are used. $25.00 A set of stock intake boots with a stock boost bottle, they are used. $20.00 A set of used graydon nerf bars with black webbing, has all hardware. $50.00 Stock radiator caps that are used. $3.00 A used cascade front swingarm chain slider in black. $5.00 A red lonestar axle nut (used). $25.00 A used rear brake lever. $15.00 A used set of 1989 front brake calipers with flexible and hard lines. $45.00 A used DG front bumper. $25.00 A used Cascade quick release flag mount. $10.00 A couple sets of stock banshee swingarm chain adjusters, along with some of the long adjuster bolts. Some brand new and some used. $5-$10 depending on which one A used White brothers boost bottle. $5.00 A used and polished front brake resevoir cap. $10.00 A used stock headlight/kill switch. $10.00 A used set of cascade rear fender support brackets. $5.00 A used set of blue radiator and tank plastics. $45.00 A used aluminum bar clamp with key switch and light mounts. $15.00 A used stock radiator. $25.00 A brand new rear led tail light and bracket (polished). $25.00 A motion pro twist throttle with black oury grips, missing the large screw in adjuster on the throttle. $20.00 A slightly used front swingarm pivot bushing (big long one). $10.00 A used set of cascade pipe clamps that were on some pt mids. $10.00 A used set of chrome stock foot pegs that have chrome peeling off them. $20.00 A used set of Innova Sand Gear front dune steer tires 22x8x10 on SS (stamped series) aluminum rims. They are the dual rib front steer tires. These are currently on my bike. $120.00 A stock used tie rod. $5.00 A thumb throttle cable for twin carbs. $10.00 A stock used outer tie rod end. $5.00 A stock used stator cover with gasket. $10.00 Quote
Phelps Posted August 1, 2010 Report Posted August 1, 2010 A used set of cascade pipe clamps that were on some pt mids. $10.00 A brand new rear led tail light and bracket (polished). $25.00 price shipped to 73401 and a paypal addy for payment thanks Quote
Snopczynski Posted August 1, 2010 Author Report Posted August 1, 2010 (edited) The pipe clamps and tail light + bracket are gone. FYI: The front end (A-arms on my bike) are $125 for all four links, or $35.00 each. These arms will come with just the zerks, and the urethane bushings. I have to keep my bolts, steel bushings, and caps for my new front end. The front end that is off the bike and is seperated out will be $95.00 for all 4 links, or $26.00 per link. This front end is in good shape, but has a little more finish wear on it. This one will come with the factory urethane bushings, caps, and bolts. There are 2 grease zerks missing. Both front ends have tight links. The works shocks are standard travel shocks. Edited August 1, 2010 by Snopczynski Quote
parttimer Posted August 1, 2010 Report Posted August 1, 2010 The pipe clamps and tail light + bracket are gone. FYI: The front end (A-arms on my bike) are $125 for all four links, or $35.00 each. These arms will come with just the zerks, and the urethane bushings. I have to keep my bolts, steel bushings, and caps for my new front end. The front end that is off the bike and is seperated out will be $95.00 for all 4 links, or $26.00 per link. This front end is in good shape, but has a little more finish wear on it. This one will come with the factory urethane bushings, caps, and bolts. There are 2 grease zerks missing. Both front ends have tight links. The works shocks are standard travel shocks. Hey Snop, do you have the stainless bolts for the handle bar mount? Thanks, Quote
Snopczynski Posted August 2, 2010 Author Report Posted August 2, 2010 Yep, the pipe clamps sold. Quote
Snopczynski Posted August 2, 2010 Author Report Posted August 2, 2010 The fender supports, bar clamp, and pivot bushing are gone now too. Quote
Snopczynski Posted August 3, 2010 Author Report Posted August 3, 2010 The works shocks are dual rate springed with steeler bodies. They are less than 2 years old and have about 15 rides on them. Quote
mopar1rules Posted August 3, 2010 Report Posted August 3, 2010 jeff, i pm'ed you about the dg front bumper Quote
Snopczynski Posted August 4, 2010 Author Report Posted August 4, 2010 Mopar, I think it is sold, if it is not, then I will let you know right away. Quote
Snopczynski Posted August 4, 2010 Author Report Posted August 4, 2010 The following are now sold: Cylinders, nerf bars, DG front bumper. Quote
Snopczynski Posted August 4, 2010 Author Report Posted August 4, 2010 Hey is the LSR axel nut available? pics pls THanks yes, did you see the pic of it? Quote
Snopczynski Posted August 4, 2010 Author Report Posted August 4, 2010 Hey just saw the pics... this axel nut just bolts up directly right? I dont need anything else? cause I know my durable nut is more or less a 2 piece one... just wonderin.. also interested in the stock boost bottle no need for the boots though The nut screws on and pinches down with a bolt. I guess I could sell the stock crossover tube seperate. Quote
Snopczynski Posted August 4, 2010 Author Report Posted August 4, 2010 Well did I quote you a price on shipping to canada? Because I dont remeber quoting one. I could be wrong though. We dont run the nut anymore because the bike has a JJ&A Axle on it now. You can't use the nut on it. I can't tell what it is you want, so I need you to list the items out and give me the postal code in canada to get you a price for everything with shipping. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.