MasterBlaster Posted July 30, 2010 Report Posted July 30, 2010 ok i have a 2005 yamaha banshee that is pretty much stock except for fmf fatty exhaust, gutted fmf powercore 2 silencers, pro designs pro-flow k&n intake system with outerwares, scary fast power now valve, and no air lid. i run maxima 927 castor oil mixed 40:1 with premium gas. My main jet is 300 and a 25 piolet, my bike will boil over from the radiator after running awhile and it bogs down when i take off easy. my elevation is 25 feet and the temperature is around mid 80s to around 100 fahrenheit but right now the wheather.com says its 94 and feels like 108. I also have a carb sync tool if that helps any so could someone help me with my jetting like what size mains and piolets? Thanks Quote
GrMeyer Posted July 30, 2010 Report Posted July 30, 2010 (edited) Sounds rich! Check the coolent and make sure ur not running low. If ur overflow is getting full then u might have a bad head gasket. Summer months I also drain my coolent and run a 25(coolent)75(water) mix. Edited July 30, 2010 by GrMeyer Quote
MasterBlaster Posted July 30, 2010 Author Report Posted July 30, 2010 Sounds rich! Check the coolent and make sure ur not running low. If ur overflow is getting full then u might have a bad head gasket. Summer months I also drain my coolent and run a 25(coolent)75(water) mix. ok so what size mains and piolets should i run? right now im running 300 mains and 25 piolets Quote
sleeper06 Posted July 31, 2010 Report Posted July 31, 2010 280 main 27.5 pilot stock needles all the way rich,make sure of your pump working also Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.