lt1bird Posted June 17, 2010 Author Report Share Posted June 17, 2010 cant find that link to that message... Quote Link to comment Share on other sites More sharing options...
Darthwall Posted June 17, 2010 Report Share Posted June 17, 2010 I have used the vitoe's 012 gasket on my 4 mill to try and solve a clearance prob before and this was with a set of trinity pistons the setup was suppose to match but was .018 0ff of .040 so the gasket got it closer Quote Link to comment Share on other sites More sharing options...
lt1bird Posted June 17, 2010 Author Report Share Posted June 17, 2010 talked with tim at titan racing....what a great guy...tons of knowledge........ hes gonna set me up with some custom domes. set up at about 50 squish so the rpms will rev a bit more(loose a bit of torque).... thanks for the help! Quote Link to comment Share on other sites More sharing options...
sheefreak Posted June 17, 2010 Report Share Posted June 17, 2010 That is the best move you could have made. He will set you up perfectly. Quote Link to comment Share on other sites More sharing options...
lt1bird Posted June 18, 2010 Author Report Share Posted June 18, 2010 (edited) Looks like one dome is definitly cut diffrent than the other. squish in one is .054 and the other .049. Ill test more tonight. I checked the cyl and stuff, everything is perfect. Just the cut in the dome. tried to measure it with some verniers, could not get a good place to measure it as the taper cut is tricky. Edited June 18, 2010 by lt1bird Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted June 21, 2010 Report Share Posted June 21, 2010 Glad Tim is hooking you up. Tell him I said HI. Here's the link you were looking for. Everyone give it a good read. http://bansheehq.com/forums/index.php?showtopic=131445&st=0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.