micky Posted June 9, 2010 Report Posted June 9, 2010 there is a bar located about 4 inches from the shifter that came out of the case how do I reinstall this fork guide without splitting the case Quote
bansheesandrider Posted June 9, 2010 Report Posted June 9, 2010 To fix it correctly you will have to split the cases. Which side did it come out? If it came out the left side, there should also be a plug in the hole. Also now that I think about it there should be an E clip on the shaft inside the cases to keep it from coming out. You had better open up your cases and find out what is going on in there. Quote
micky Posted June 10, 2010 Author Report Posted June 10, 2010 To fix it correctly you will have to split the cases. Which side did it come out? If it came out the left side, there should also be a plug in the hole. Also now that I think about it there should be an E clip on the shaft inside the cases to keep it from coming out. You had better open up your cases and find out what is going on in there. Thanks that is what I thought yes it is the left side plug is gone and so is the clip that holds the pin in, the pin pulls right out Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.