Doddy Posted April 5, 2010 Report Share Posted April 5, 2010 Well I posted a couple of weeks ago that I was having some serious issues with my bike. After trouble shooting for a week I could still only get one cylinder to fire, the other didn't have a high enough compression to even fire. So it's time for a top-end rebuild and some extra motor work. I'm planning on the following mods, and want to continue to run on pump gas. Current Mods: >FMF Fattys >V-Force II Reeds >Advanced Timing +4* >Pods Motor work to be done: >Cylinders: Bored, honed and new pistons >Shaved head (.035 I believe) >Dune/Play Port >Lightened flywheel >Crank Trued and welded Is there anything else that I should be looking into while I'm having all this done? Thanks, Alex Quote Link to comment Share on other sites More sharing options...
AKheathen Posted April 5, 2010 Report Share Posted April 5, 2010 well, what kinda riding do you do that calls for a lightened flywheel? i would start looking at the tranny and shifter for mods, since you'll be in there anyways. how's the clutch? with the new porting, you may need 1/2 hd springs, and i would take a good look at the basket for grooving Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.