Spindle Question

[89 Banshee Man]

I have a 89 Banshee and woundering if I could swap out my spindles and hubs for the YFZ 450 spindles and hubs? I have a set but just wanted to know if they would work or not. I may just put them on this week and see how they are.

 

What would be your guys opinon on this mod?

[89 Banshee Man]

would this put to much stress on the ball joints?

some one has to know something on this.

[bansheesandrider]

Why do you want to do this? I have been told using the YFZ spindles and hubs throw off the front end geometry and make s the bike handle poorly. I have not done this myself, so I don't know for sure. I have been told that you can use YFZ calipers as a direct bolt on to the later style Banshee spindles(1990- on). Yes the spindle did change on a Banshee between 89 and 90, not between 90 and 91 like some people thnk because that is when the J arms became A arms.

[AKheathen]

yah, most likely will stress out the ball joints when it's extended and tear them up. only run them with yfz arms

[89 Banshee Man]

ok I was just woundering. Thanks Guys