Carb Help

[New2Banshee's]

Hey. I have a 2002 yamaha banshee. It has T5 pipes and K&N air Filter. as far as i know there is no motor work. I just took the TORS off, but i still have a bog when i give it gas. I've read alot on the idle screw placement and i am still lost. If anyone can help me with the jetting and how to set these idle screws i would apprecate it. I live in denver, co so about 5200 ft above sea level

[theoriginal87]

Hey. I have a 2002 yamaha banshee. It has T5 pipes and K&N air Filter. as far as i know there is no motor work. I just took the TORS off, but i still have a bog when i give it gas. I've read alot on the idle screw placement and i am still lost. If anyone can help me with the jetting and how to set these idle screws i would apprecate it. I live in denver, co so about 5200 ft above sea level

 

 

u need to pull off your carbs and see what jets are in there.. both main jets and pilots... your idle screws dont need much adjustment just need to be adjusted the same on both sides and set to a good idle speed. But after this i would start off with 27.5 pilots for sure, around 280's for the mains and your air screws 1.5 turns out from seated. although im not sure as iv never owbed toomeys.. but im sure someone will chime in with a good starting point on the mains

[New2Banshee's]

u need to pull off your carbs and see what jets are in there.. both main jets and pilots... your idle screws dont need much adjustment just need to be adjusted the same on both sides and set to a good idle speed. But after this i would start off with 27.5 pilots for sure, around 280's for the mains and your air screws 1.5 turns out from seated. although im not sure as iv never owbed toomeys.. but im sure someone will chime in with a good starting point on the mains

 

Sweet thanks man. i have 25 pilots and 190 main jets. so ill go first thing tomorrow and get some bigger jets. thanks