wont hook up

[NVRBanshee]

i just got back from the dunes racing and well i could not get my bike out of the hole it a stock stroke drag port with 34mm carbs on the bottle, +10 swingarm 22-11-10 12paddle haullers. 14-42 gearing racing 300ft sand i didnt even run the bottle cuz i couldnt hook up. any help please

[shanYE west]

tire pressure?

[NVRBanshee]

tire pressure?

 

i tried 10psi down to 4psi

[tundish2800]

what are you running in the rear a shaw, stock shock, strut?

[NVRBanshee]

what are you running in the rear a shaw, stock shock, strut?

stock shock

[fastbanshee8]

Try a 15 tooth counter shaft sprocket, it should help out quite a bit.

[shanYE west]

I was using 15/42 or 14/40.. I was using 13 extremes with 2lbs of pressure. worked the best for me.

[FASTOYS]

You need more than a stock shock for 10 over arm, or at least a heavy spring. The soft shock is sagging and absorbing all your launch inertia.

[shanYE west]

Yep... That'll do it Jeff.

 

Not to mention the shock length. Makes it tall in the ass and transfers weight to the front of the bike.

[Wheelman Chassis]

im kinda in the same boat as the poster i have a +12 arm, what do we do for a shock and is a stiff rear better then a soft one for dragging?

[shanYE west]

im kinda in the same boat as the poster i have a +12 arm, what do we do for a shock and is a stiff rear better then a soft one for dragging?

 

marvin shaw shocks is the best option..

[Wheelman Chassis]

can the shaws be adjusted for a heavy rider without sending it out to them? and do we have to have the front shaws to? i have elkas in front already set for my weight 260lbs

[FASTOYS]

We can sell you a hvy spring for your stock shock.

[NVRBanshee]

We can sell you a hvy spring for your stock shock.

How much? thanks for all the help

[Wheelman Chassis]

yea jeff,how much and what weight is it for?