88ttop Posted November 27, 2009 Report Posted November 27, 2009 ok so i was ridin tonight went to change gear and the clutch lever let all the way to the handle bars. i have no clutch now cant take it out of gear put it in gear. any1 have any ideas to what happened? i adjusted the clutch by the nut on the lever didnt do anything Quote
98_shee Posted November 27, 2009 Report Posted November 27, 2009 Did the cable brake? Pull the lever and look at the clutch arm under the left carb and see if it is moving, if it is pull your clutch cover off and see whats going on with your clutch. Quote
88ttop Posted November 27, 2009 Author Report Posted November 27, 2009 the arm on the case is not moving Quote
88ttop Posted November 28, 2009 Author Report Posted November 28, 2009 any1 have a pic of wjhat the shifter linkage looks like on the case Quote
AKheathen Posted November 28, 2009 Report Posted November 28, 2009 go buy a new cable and install it..... Quote
88ttop Posted November 28, 2009 Author Report Posted November 28, 2009 go to on the 1st when i get paid would it be possible for the cable to stretch about a inch or 2 Quote
AKheathen Posted November 28, 2009 Report Posted November 28, 2009 cables do not suddenly stretch...and they are cheap, like $12... Quote
88ttop Posted November 28, 2009 Author Report Posted November 28, 2009 yea like i said the end of the cable dosent even hit the fitting when u pull the clutch lever Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.