88ttop Posted November 17, 2009 Report Posted November 17, 2009 ok so on my 97 shee when i squeeze the clutch lever in she still rolls. do i need to lossein the cable or make it tighter Quote
88ttop Posted November 17, 2009 Author Report Posted November 17, 2009 ok thanks man i have one more question i was ridin for like 4hrs on Sunday and sometimes it would run great and others not so much and it would not start i had to pull start it any ideas Quote
crustydemon Posted November 17, 2009 Report Posted November 17, 2009 Do a compression test to find out what condition your motors in, They day 110 psi is minimum per cylinder. Below that its time for a top end. Buy the way, you shouldnt pull start it. Quote
88ttop Posted November 17, 2009 Author Report Posted November 17, 2009 ok will do a comp test. if i have a min of 110 what else do u think it might be. the guy i bought it from said he just had the top end rebuilt Quote
crustydemon Posted November 17, 2009 Report Posted November 17, 2009 Hard to say, you need to describe what it doing in a little more detail. Clean the carbs and see if that helps. Quote
88ttop Posted November 17, 2009 Author Report Posted November 17, 2009 this is all that it has done to it that i know of a fmf boost tube a new stator and timing is set at 4 . when i am ridin it will run great ill shut it off and it wont start like i said ill have my buddy pull me so i can start it and it will start right up and run great. i have noticed that when i was ridin it was smokin alot from the exhaust and it ever use to Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.