Misc parts needed

[SLORYDER]

Hey I need that shaft that goes through the tranny shaft (the one that the clutch arm pushes against the pressure plate to release the clutch) and also the ball that goes in there with it.

 

I also need the circlip that retains the kick starter idler gear.

 

Also a full set of crank-case nuts and bolts

 

Thanks

[SLORYDER]

bumpers

[370banshee]

to be totally honest with ya.. your looking at about $12 at a yamaha dealer for the tranny parts.. i know the ball is only like $1.60 i've lost a few over the years.. the rod is pretty cheap and the clip is probably under a dollar.

 

youir best bet for the crankcase nuts and bolts is probably eaby you can buy stainless sets for cheap.. i think less than $20.. at least they used to be.

[SLORYDER]

to be totally honest with ya.. your looking at about $12 at a yamaha dealer for the tranny parts.. i know the ball is only like $1.60 i've lost a few over the years.. the rod is pretty cheap and the clip is probably under a dollar.

 

youir best bet for the crankcase nuts and bolts is probably eaby you can buy stainless sets for cheap.. i think less than $20.. at least they used to be.

 

Thanks

[AKheathen]

i think jeff has all that....probably even cheaper, too