rockets and my CV 35mm airstryker

[runninglikeshit]

Hey

iam at 1000 ft. altitude and its usually about 15 degrees celcius and I have a banshee punched out 100 thou. and have mild porting and polishing done,vitos super stock pistons,4 degree advance,cool head with 22cc chambers (150lbs. compression) a CV 35mm airstryker on it and a set of rocket pipes. I was wondering if anyone knows the jetting I should be running with this carb. They say the T5s run the same jetting as the rocket pipes.

thanks

Roy

[SAVAGE420]

I went one up on the mains going from my old T5's to my rockets.

Do the same.

[sleeper06]

Those carbs jet real low,big compression motor-aggressive port work-4mil took 135main 40pilot.Hope this helps

[Snopczynski]

hey guys, he said cv carb. Technically thats a trinity 2 into 1 constant velocity manifold. He needs to clarify this a little better.