thebrittishguy Posted September 3, 2009 Report Posted September 3, 2009 (edited) Hello all. My shee is up and running stronger than ever after the rebuild. 1 last issue with it that im hoping someone can share some light. If i kick it over with the caps from the coil on both spark plugs, it wont start. if i remove the left one and put a screw driver or anything metal in so that it sparks and earths on me to the frame or pipes and shocks me then it starts on the right cylinder. i then put the left cap back on the left spark plug and the left cylinder kicks in and the bike runs like a champ, it wont start if they are both on the spark plugs. it is the left cap that does this, cause it i swap them around then i have to shock on the opposite side if that helps id like to know what i can do to not have to shock myself in order to get the bike started and running..... wierd one that i cant solve. Edited September 3, 2009 by thebrittishguy Quote
stokes77 Posted September 3, 2009 Report Posted September 3, 2009 lol, how'd you figure that one out? Sorry man but that's funny.... Only thing that I can thick of is that maybe you have a bad ground somewhere. Check your wiring around the pipes, see if maybe it has melted the insulation, and just go through the harness look where it could be a problem. Quote
thebrittishguy Posted September 3, 2009 Author Report Posted September 3, 2009 lol i know. nice alarm system i have, just not very convenient if i want to stop somewhere... ha ha Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.