Jump to content

Parting out banshee


Recommended Posts

parting out my whole banshee,.. for real. I never ride it, and I want a bike. so here we go.

 

--98 frame yellow ppg hd paint $150+shp

 

--g force axle +4 $85+shp

 

--rear hubs yellow $20+shp

 

--rear carrier yellow $20+shp good bearings

Ill inc srocket hub w match paint

 

--rear wheels blk hipers/mx6 $350+shp 80-85% tread

 

--34mm mikuni tm flatslides $150+shp

 

--front wheels douglas flipped $65+shp

 

--+3+1 a arms w lines n ties $375+shp

 

--elka piggy rez shocks $500+shp

 

--rear brakes (complete) $50+shp

 

--ac pro peg nerfs $50+shp

 

--rocket pipes $300 +shp

 

--pods for carbs $25+shp

 

-- negative 2" swingarm blk $150+shp

 

--boyeseen dual stage carbon fiber reeds on stock cages $35 + shp

 

--renthal bars $10 +shp

 

-- nacs billet bar clamp $10+ shp

 

-- asv clutch lever $ 45+ shp

 

-- front brake master cyl/lever $15+ shp

 

--front rotors, brakes $55+shp w a arms $30.

 

-- Passion 12 port RZ cylinders (for 4mm)

they are 65.5 bore, new pistons. they bore is new. they have about 20 minutes run in on them. the dick that did the bore didnt clearance the pv`s and the piston and rings rubbed it. they need new rings and hone. pistons are still good. the worst cylinder holds 160psi. the stroke clearanced and milled head comes with. (cyls, pistons, head) very rare and expensive combo $600+shp run with vp110/93 @ 50/50

 

--Full Banshee setup RZ harness with matching rz 200w stator, servo all the jazz $150+shp

 

--lightened flywheel $65+shp

 

 

--4mm bottom end excluding above but with side covers, kick, shift, 4mm crank, billet basket, hd springs n plates $500+shp

 

Or motor whole w harness for $1200.

 

Misc brackets n crap, ask or throw offers. tank radiator plastic ect dont sell for much and will prob sell really cheap or go in trash.

 

 

Anything left over by Sat 15th will be listed on eGay. Postal Money orders get 10% off. I have paypal.

 

Please pm me for contact information or any questions or both.

 

 

I will sell the bike whole as is for $3500 or trade for bike year 01+ and 750cc + gsxr, r1, 929.

 

 

 

bansh146.jpg

jan25003.jpg

salespics2001.jpg

bansheerz4001.jpg

newban010.jpg

(mirror effect on picture)

QU0805_pos01.jpg

(because this is hot)

Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

parting out my whole banshee,.. for real. I never ride it, and I want a bike. so here we go.

 

--98 frame yellow ppg hd paint $150+shp

 

--g force axle +4 $85+shp

 

--rear hubs yellow $20+shp

 

--rear carrier yellow $20+shp good bearings

Ill inc srocket hub w match paint

 

--rear wheels blk hipers/mx6 $350+shp 80-85% tread

 

--34mm mikuni tm flatslides $150+shp

 

--front wheels douglas flipped $65+shp

 

--+3+1 a arms w lines n ties $375+shp

Could i see a pic of the problem with the cylinders you are talking about???

--elka piggy rez shocks $500+shp

 

--rear brakes (complete) $50+shp

 

--ac pro peg nerfs $50+shp

 

--rocket pipes $300 +shp

 

--pods for carbs $25+shp

 

-- negative 2" swingarm blk $150+shp

 

--boyeseen dual stage carbon fiber reeds on stock cages $35 + shp

 

--renthal bars $10 +shp

 

-- nacs billet bar clamp $10+ shp

 

-- asv clutch lever $ 45+ shp

 

-- front brake master cyl/lever $15+ shp

 

--front rotors, brakes $55+shp w a arms $30.

 

-- Passion 12 port RZ cylinders (for 4mm)

they are 65.5 bore, new pistons. they bore is new. they have about 20 minutes run in on them. the dick that did the bore didnt clearance the pv`s and the piston and rings rubbed it. they need new rings and hone. pistons are still good. the worst cylinder holds 160psi. the stroke clearanced and milled head comes with. (cyls, pistons, head) very rare and expensive combo $600+shp run with vp110/93 @ 50/50

 

--Full Banshee setup RZ harness with matching rz 200w stator, servo all the jazz $150+shp

 

--lightened flywheel $65+shp

 

 

--4mm bottom end excluding above but with side covers, kick, shift, 4mm crank, billet basket, hd springs n plates $500+shp

 

Or motor whole w harness for $1200.

 

Misc brackets n crap, ask or throw offers. tank radiator plastic ect dont sell for much and will prob sell really cheap or go in trash.

 

 

Anything left over by Sat 15th will be listed on eGay. Postal Money orders get 10% off. I have paypal.

 

Please pm me for contact information or any questions or both.

 

 

I will sell the bike whole as is for $3500 or trade for bike year 01+ and 750cc + gsxr, r1, 929.

 

 

 

bansh146.jpg

jan25003.jpg

salespics2001.jpg

bansheerz4001.jpg

newban010.jpg

(mirror effect on picture)

QU0805_pos01.jpg

(because this is hot)

 

Link to comment
Share on other sites

cleared it up bro, sorry bout that!

 

 

No worries, i PM'd you back and i will let you know ok......

Link to comment
Share on other sites

parting out my whole banshee,.. for real. I never ride it, and I want a bike. so here we go.

 

--98 frame yellow ppg hd paint $150+shp

 

--g force axle +4 $85+shp

 

--rear hubs yellow $20+shp

 

--rear carrier yellow $20+shp good bearings

Ill inc srocket hub w match paint

 

--rear wheels blk hipers/mx6 $350+shp 80-85% tread

 

--34mm mikuni tm flatslides $150+shp

 

--front wheels douglas flipped $65+shp

 

--+3+1 a arms w lines n ties $375+shp

 

--elka piggy rez shocks $500+shp

 

--rear brakes (complete) $50+shp

 

--ac pro peg nerfs $50+shp

 

--rocket pipes $300 +shp

 

--pods for carbs $25+shp

 

-- negative 2" swingarm blk $150+shp

 

--boyeseen dual stage carbon fiber reeds on stock cages $35 + shp

 

--renthal bars $10 +shp

 

-- nacs billet bar clamp $10+ shp

 

-- asv clutch lever $ 45+ shp

 

-- front brake master cyl/lever $15+ shp

 

--front rotors, brakes $55+shp w a arms $30.

 

-- Passion 12 port RZ cylinders (for 4mm)

they are 65.5 bore, new pistons. they bore is new. they have about 20 minutes run in on them. the dick that did the bore didnt clearance the pv`s and the piston and rings rubbed it. they need new rings and hone. pistons are still good. the worst cylinder holds 160psi. the stroke clearanced and milled head comes with. (cyls, pistons, head) very rare and expensive combo $600+shp run with vp110/93 @ 50/50

 

--Full Banshee setup RZ harness with matching rz 200w stator, servo all the jazz $150+shp

 

--lightened flywheel $65+shp

 

 

--4mm bottom end excluding above but with side covers, kick, shift, 4mm crank, billet basket, hd springs n plates $500+shp

 

Or motor whole w harness for $1200.

 

Misc brackets n crap, ask or throw offers. tank radiator plastic ect dont sell for much and will prob sell really cheap or go in trash.

 

 

Anything left over by Sat 15th will be listed on eGay. Postal Money orders get 10% off. I have paypal.

 

Please pm me for contact information or any questions or both.

 

 

I will sell the bike whole as is for $3500 or trade for bike year 01+ and 750cc + gsxr, r1, 929.

 

 

 

bansh146.jpg

jan25003.jpg

salespics2001.jpg

bansheerz4001.jpg

newban010.jpg

(mirror effect on picture)

QU0805_pos01.jpg

(because this is hot)

mmmmmmmmmmmWWAAAAAAAAAAAAAA!/1!!!!!1!!!!

you're too early :confused: :banghead: :banghead: :banghead: :verymad: :shoothead:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...