Banshee Roost Posted July 21, 2009 Report Posted July 21, 2009 With mods in sig stock carbs 1100 ft!Gonna start 320 mains needle 3rd clip but what pilots? 25's or 27.5? Anyone with 25 think they will handle 27.5's. Quote
AKheathen Posted July 21, 2009 Report Posted July 21, 2009 i'm running 25's on mine, but i think i need some 27.5's. gonna rebuild my silencers and then see what they want. it's about where the airscrews wanna run. Quote
tundish2800 Posted July 21, 2009 Report Posted July 21, 2009 I had 330 mains in mine with 27.5 pilots at 600ft above sea level with pc pipes and it ran good Quote
Overboost Posted July 21, 2009 Report Posted July 21, 2009 I have 25 in mine and dont have any noticeable problems to speak of from jetting. I tried 27.5 on it once and it bogged really bad, been good so far with the 25. every engine is different. Quote
Snopczynski Posted July 21, 2009 Report Posted July 21, 2009 Your kind of in between the two sizes with your mods. I would run the 27.5, then try the 25 and see what feels better. Also, your motor could probably benefit more from a dual stage reed, or some carbon tech low or mid tension petals. The high tension reeds arent really meant to be ran with a pipe like the pro circuits. Quote
Banshee Roost Posted July 25, 2009 Author Report Posted July 25, 2009 Shit the 27.5's worked great! Also using 320 mains needle on 3rd clip! It fn rips hard now. I like these alot better than my previous Fatty's! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.