97stageIVBansh Posted July 2, 2009 Report Share Posted July 2, 2009 (edited) ok finally getting my jetting close, i have trinity pipes, 450ft elevation, 90 degree temp, k&n box with no lid, and a&s dune port, 150 psi, stock carbs, right now i have 27.5 pilots, 1.25 turns out, dynojet needle third clip from the bottom clip, 340 main. i havent really had time to do a plug chop, but does this sound close? should i lean my needle out alittle it is kinda boggy in the bottom but when the power kicks it it hits hard? before i had the dune port i had a 320 main and stock pilot idk im kinda new at this some opinions would be awesome, thanks guys Edited July 2, 2009 by 97stageIVBansh Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted July 2, 2009 Report Share Posted July 2, 2009 Sounds close,I ran 340 with one dune port,380 with another,everybody ports diffrent,call A+S to make sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.