neonarc Posted June 25, 2009 Report Posted June 25, 2009 Im down in Mexico and I cant get a hold of a TORS removal kit. I was thinking of buying the parts to make my own but I have some questions. I got the size of the drill bit and tap for the idle screw from here but I dont know the size of the idle screw itself. I know the part number from Mikuni is V24/224. Can someone please provide the specs of the screw specially the length? Also, do you think I can get the stock throttle cable to work after I remove the TORS? The cables already have adjuster nuts where they hook up to the TORS so would it be to just get the metal curved sleeve to keep them from binding? All ideas are welcome as I just want to get my shee running for July 4th weekend. Quote
sleeper06 Posted June 25, 2009 Report Posted June 25, 2009 call the number on my sig He will ship it to you. Quote
neonarc Posted June 26, 2009 Author Report Posted June 26, 2009 call the number on my sig He will ship it to you. Thanks sleeper. BUt with the cost of shipping and import taxes, the total is more than I can boot right now. I went searching for the tap today and I couldn't find a 6mmx.75 only found a 6mmx1.0. Do you guys think this is too spaced of a thread for this purpose? Quote
neonarc Posted June 26, 2009 Author Report Posted June 26, 2009 Can someone at least post the length of the idle screw? Im heading out of town later today and it would be best to get all the parts here. Quote
AKheathen Posted June 27, 2009 Report Posted June 27, 2009 Can someone at least post the length of the idle screw? Im heading out of town later today and it would be best to get all the parts here. it's about 1.5" and the big problem with the stock cables is the way they atatch. open the tors boxes and you'll see what i mean. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.