kubitza123 Posted June 8, 2009 Report Posted June 8, 2009 I bought another drag quad so now selling mine. I can sell it setup for sand or just like it sits for asphalt. Either way it will come with spindle mnts on the front. Best run was a 6.6 at 101mph int he 1/8th mile without a wheelie bar. I just had Tim at AZCUSTOM build me a 4 link chome-moly bar that will come with the quad BRAND new. I can assure any1 that buys it that if you weigh 205lbs or less and can ride on the bar it will run atleast 6.4's on motor maybe faster. That run was with a 1.55 60ft with one tire on the ground and have the pics to prove it. Any questions call me anytime at 1-254-715-0491 Mark or [email protected] Quads built right and have best of everything. Dependable and ready to ride. Jeff at FAST will back me up on all engine work that has been done to it as well. NOT TRADES Looking for $6,800 obo LOCATION is Waco,TX area $$$ OFFERS welcome just be reasonable Has the following:::::: Tyson +6 full chrome-moly hillshooter chassis extremely light bike should weigh around 260lbs wet +12 slcquadcustoms chrome swinger JJ&A drag axle Direct drive spindle mounts chrome drag bars 4 link wheelie bar Shearer OOF chrome pipes straight cut gears billet clutch basket lockup lockup cover billet FAST stator cover TM chain guides custom cut seat K&N FILTERS Marvin Shaws chrome brake pedal billet PRO DESIGN shifter Barn Guys front and rear fiberglass Billet brake res. Dual PINGLE DYNA TEK IGNITON WEISCO 4 MILL LONG ROD WELDED CRANK Full DRAG port by JEFF COOLHEAD Nology wires 2-5 override cryno'ed AND MORE I'M SURE I'M FORGETTING QUADS LIGHT AND FAST PICS IN LINK http://s232.photobucket.com/albums/ee248/x973788/ IF BOUGHT FOR ASKING PRICE I HAVE $900 worth of new Nitrous stuff that will go with the quad. Everything is new and complete including battery,etc etc i mean everything even a custom aluminum $160 bracket to mount the bottle. Quote
kubitza123 Posted June 9, 2009 Author Report Posted June 9, 2009 Not yet but thinking i may part it out if needed would their be any interest??? Have to have the chassis sold locally before i'd part . Quote
kubitza123 Posted June 10, 2009 Author Report Posted June 10, 2009 Bump Frame with billet short shifter,chrome brake pedal,stem,and chrome drag bars, and front suspension $1600.00 firm powder coats like new emerald green lots of metallic or flake in it as well. Tyson +6 out front. If it sells i'll part if any1 shows interest ont he parts let me know if theres something you'd be interested in. Quote
popa_top2000 Posted June 10, 2009 Report Posted June 10, 2009 I would be interested in the axle and carrier, give me a price if you decide to part???? Possibly interested in the swingarm, price on that too???? Quote
kubitza123 Posted June 11, 2009 Author Report Posted June 11, 2009 Bump looking for $ 1600 for the frame with front suspension,stem and chrome drag bars,billet short shifter,and chrome brake pedal. Extermely light frame powders like new. Will part if i can get the chassis sold. Will put the new wheelie bar AZCUSTOMS just built with it for an extra 300 Quote
trademark Posted June 12, 2009 Report Posted June 12, 2009 pics of swinger and axle whole rear end and a price? Quote
trademark Posted June 12, 2009 Report Posted June 12, 2009 pics of swinger and axle whole rear end and a price? pipes also......price and pics Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.