03bansheeLE Posted June 5, 2009 Report Posted June 5, 2009 Hey I bought a clutch kit from Jeff at F.A.S.T. and I am currently installing it. I noticed the clutch that was in my Banshee (not sure what kind it is) has the rubber cushion rings between the steel plates under the friction plates. It appears that they will not fit with the new clutch because the new friction plates have a larger area. I assume they are not supposed to be used with the new clutch, am I correct? Thanks a lot. Darren Quote
DallasGDub Posted June 5, 2009 Report Posted June 5, 2009 Only use the new plates, and fibers. No need for the old rubber cushions, fibers, and plates. Quote
03bansheeLE Posted June 5, 2009 Author Report Posted June 5, 2009 Okay thanks a lot. I was pretty sure the clutch kit was a complete kit, just wanted to make sure. Quote
DallasGDub Posted June 5, 2009 Report Posted June 5, 2009 I did the same thing. I tried for like 20min to get it to go on the inside of the plate and then put it on. LOL....Had to hit someone up on here for advise. Quote
rubberneck Posted June 5, 2009 Report Posted June 5, 2009 Make sure you soak the new fibers for a min of 20 min in oil before installing and adjusting. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.