06shee325 Posted May 28, 2009 Report Posted May 28, 2009 i bought a 2 into 1 35mm pwk carb kit off here, finally got around to installing it after 4 months and it was dumping fuel out the overflow, i took apart the float bowl, lifted the float up and down a few times, cleaned it out, put back together and still doing it, but not nearly as bad, i went down my street and it broke up all through first and half threw second gear, the second i shut it off it drips fuel. i let it stand for about 5 ins and it wouldnt stop dripping out, any help please?? i wanna ride again. Quote
Snopczynski Posted May 28, 2009 Report Posted May 28, 2009 Whats the float level set at? Does the needle/seat seal up completely when pressed? Quote
06shee325 Posted May 29, 2009 Author Report Posted May 29, 2009 Whats the float level set at? Does the needle/seat seal up completely when pressed? i dont know, how can i tell what its set at? it looks like the needle seals fine, i can hear it... Quote
Snopczynski Posted May 29, 2009 Report Posted May 29, 2009 the float height is from the carm bowl mating surface to the top of the float just barely resting on the needle. The needle and seat is not where the slide is, its down in the bowl attached to the float. Quote
Darthwall Posted May 29, 2009 Report Posted May 29, 2009 clean it up real good and it should run like a champ Quote
06shee325 Posted June 5, 2009 Author Report Posted June 5, 2009 clean it up real good and it should run like a champ Thanks for the help, the floats were out of adjustment, i moved them level and it doesn't leak fuel anymore. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.