T_Shee Posted May 20, 2009 Report Posted May 20, 2009 so i bought a hotrods stock stroke crank used off here about 6 months ago from a reliable seller. it felt really good and tight when i put it in but the other night i was adjusting my timing plate and noticed the flywheel would move in and out a bit, so i took the flywheel off and it is the crank moving maybe like a couple mm back and forth but none up and down. i know i put the alignment clips in that hold the bearings in place when i put it back together and it doesnt seem like the bearings are moving at all just that the crank is moving inside the bearings. so my main question is am i screwed???? bike hasnt been acting different or anything and no extra vibration, what you guys think Quote
sheerider1026 Posted May 20, 2009 Report Posted May 20, 2009 if its minimal movement, i wouldn't worry about it at all.. up/down movement would have me concerned for sure.. i wouldn't be afraid to ride it... so quit worrying travis!! lol Quote
Koolguyson Posted May 20, 2009 Report Posted May 20, 2009 The crank can move back and forth a couple mm if the crank is loose on the outter crank bearings. Quote
T_Shee Posted May 20, 2009 Author Report Posted May 20, 2009 sweet thats what i was hoping to hear. had me scared for a minute got them juggs gary. ill get with you in a day or two about getting them to you. how much extra to blast and pc gloss black? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.