toolucky Posted April 24, 2009 Report Posted April 24, 2009 Im working on a friends bike and and it has stock cylinders, ported with a Trinity stage 4 head. Im not sure if its like alot of the other aftermarket heads but i have a couple of questions about it. Trinity supplied one of those copper head gaskets and i was wondering if you are supposed to put the 1211 sealant on both sides or just the bottem. Also it has these wierd looking nuts that actually screw down into the head, do i need to seal those to? My cheetah motor is set up totally different with just orings so im not to sure about this type. Thanks in advance. Quote
BoostedRex Posted April 24, 2009 Report Posted April 24, 2009 Im working on a friends bike and and it has stock cylinders, ported with a Trinity stage 4 head. Im not sure if its like alot of the other aftermarket heads but i have a couple of questions about it. Trinity supplied one of those copper head gaskets and i was wondering if you are supposed to put the 1211 sealant on both sides or just the bottem. Also it has these wierd looking nuts that actually screw down into the head, do i need to seal those to? My cheetah motor is set up totally different with just orings so im not to sure about this type. Thanks in advance. The trinity heads are slightly different from all other aftermarket heads, mainly the domes. But you just use o-rings with the head. No head gasket. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.