vdubn Posted April 19, 2009 Report Posted April 19, 2009 I have a very nice Round Housing 10" over rear swing arm, made from Chromoly, with the spider laser cut section in the middle. It is black powder coated, and is brand new, just installed on the bike, never ran. I was going to run this, but I need the chain guide bracket forward about 4", and I don't want to mess up the powder coating, and I am going to 12" anyway. I also have the Fireball Racing rear carrier with dual row bearings, in the same like new condition. This arm was $400, and the carrier was $150 Looking to get $400 for both, or $300 for the arm, and $100 for the carrier. Here is the rear carrier: I also have a Rear Shock out of a 2006 R6 Street Bike, that has been modified to fit into the Banshee frame and lower linkage. This lowers the bike nice, and is a good setup for a drag bike, with a good stiff spring for hard launches. $75 for it. Paypal is accepted/preferred for all of these items. Quote
JustinBCrazy Posted April 19, 2009 Report Posted April 19, 2009 I have a very nice Round Housing 10" over rear swing arm, made from Chromoly, with the spider laser cut section in the middle. It is black powder coated, and is brand new, just installed on the bike, never ran. I was going to run this, but I need the chain guide bracket forward about 4", and I don't want to mess up the powder coating, and I am going to 12" anyway. I also have the Fireball Racing rear carrier with dual row bearings, in the same like new condition. This arm was $400, and the carrier was $150 Looking to get $400 for both, or $300 for the arm, and $100 for the carrier. Here is the rear carrier: I also have a Rear Shock out of a 2006 R6 Street Bike, that has been modified to fit into the Banshee frame and lower linkage. This lowers the bike nice, and is a good setup for a drag bike, with a good stiff spring for hard launches. $75 for it. Paypal is accepted/preferred for all of these items. pm sent on shock.. Quote
C&B Posted April 19, 2009 Report Posted April 19, 2009 I have a very nice Round Housing 10" over rear swing arm, made from Chromoly, with the spider laser cut section in the middle. It is black powder coated, and is brand new, just installed on the bike, never ran. I was going to run this, but I need the chain guide bracket forward about 4", and I don't want to mess up the powder coating, and I am going to 12" anyway. I also have the Fireball Racing rear carrier with dual row bearings, in the same like new condition. This arm was $400, and the carrier was $150 Looking to get $400 for both, or $300 for the arm, and $100 for the carrier. If you still have the swinger, let me know, I may have a buddy that wants it Here is the rear carrier: I also have a Rear Shock out of a 2006 R6 Street Bike, that has been modified to fit into the Banshee frame and lower linkage. This lowers the bike nice, and is a good setup for a drag bike, with a good stiff spring for hard launches. $75 for it. Paypal is accepted/preferred for all of these items. Quote
vdubn Posted April 19, 2009 Author Report Posted April 19, 2009 Swinger and carrier are still available Quote
bansheejoel Posted April 20, 2009 Report Posted April 20, 2009 holy hell that is a huge rear sprocket :ohmy: Quote
vdubn Posted April 20, 2009 Author Report Posted April 20, 2009 holy hell that is a huge rear sprocket :ohmy: Yea, gotta do that so I can use all of the gears in the Hayabuse thats going in the frame That sprocket is the reason I need a new arm, since I need to relocate the rear chain guide about 4" further forward than the stock location. Quote
popa_top2000 Posted April 20, 2009 Report Posted April 20, 2009 Is that carrier for a stock size axle? Quote
vdubn Posted April 20, 2009 Author Report Posted April 20, 2009 Is that carrier for a stock size axle? The one on the bench is, which is the one for sale. The one in the rear swing arm is for a 40mm, but that one is not for sale. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.